2011-02-06, 09:35 PM
With this method, do you have to re-center each cut piece? As in, say the right part of the lighthouse... Do you need to move a single block to the direct center of the mqo grid, or do you just export it?
|
2011 projects
|
|
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
2011 projects - by dmpdesign - 2010-12-06, 03:48 PM
Re: 2011 projects - by HolyDiver - 2010-12-06, 08:26 PM
Re: 2011 projects - by Verdite - 2010-12-07, 12:48 PM
Re: 2011 projects - by dmpdesign - 2010-12-07, 02:34 PM
Re: 2011 projects - by Verdite - 2010-12-07, 06:21 PM
Re: 2011 projects - by HolyDiver - 2010-12-08, 12:28 AM
Re: 2011 projects - by Hguols - 2011-01-26, 05:09 PM
Re: 2011 projects - by dmpdesign - 2011-01-26, 07:20 PM
Re: 2011 projects - by Verdite - 2011-01-26, 11:45 PM
Re: 2011 projects - by Hguols - 2011-01-27, 07:29 PM
Re: 2011 projects - by dmpdesign - 2011-01-27, 10:41 PM
Re: 2011 projects - by Verdite - 2011-01-28, 12:37 PM
Re: 2011 projects - by Hguols - 2011-01-29, 12:19 AM
Re: 2011 projects - by Madison Lastrega - 2011-02-05, 08:33 AM
Re: 2011 projects - by Verdite - 2011-02-05, 01:47 PM
Re: 2011 projects - by dmpdesign - 2011-02-05, 03:26 PM
Re: 2011 projects - by Madison Lastrega - 2011-02-05, 06:04 PM
Re: 2011 projects - by dmpdesign - 2011-02-06, 01:31 AM
Re: 2011 projects - by Madison Lastrega - 2011-02-06, 09:26 AM
Re: 2011 projects - by Verdite - 2011-02-06, 05:57 PM
Re: 2011 projects - by Madison Lastrega - 2011-02-06, 07:00 PM
Re: 2011 projects - by Verdite - 2011-02-06, 09:35 PM
Re: 2011 projects - by Madison Lastrega - 2011-02-07, 05:27 AM
Re: 2011 projects - by Verdite - 2011-02-09, 12:27 AM
|
| Users browsing this thread: |
| 9 Guest(s) |