2011-02-14, 10:38 AM
Hey Todd, could you please post your event of your watermill wheel? I need the numbers 'cause my dang windmill sail and the grinder unit contained there in, don't want to move right......I have tried a 4 event setup and a 6 event setup and I still get a good movement then it stops goes real slow, then speeds up then repeat? I am sure it something small in my set up take a look........... (ALWAYS ON EVENT) WIND SAIL > (leaf1) "move object" I set the sail to move a speed of 75, I set the first rotation of the x axis to 180 (leaf2) "control active leaf" Move to next leaf....... (leaf3) "move Object" I still use the same speed of 75 and this time I set the x axis to 360.... (leaf4) "control active leaf" Move to leaf 0...... So why the stupid pattern, in therory that should be a continuos rotation right? I then made one the exact same but with another "move object" leaf with the third rotition of the x axis set to zero for a total of 6 leafs still no dice..........anyway your water wheel moved steadily and did not suffer from that issue , so could you post your numbers so I can put this silly windmill in the demo with full rotation of the innerds:) thanks Bro........... Also this information will help anyone else who wants simular parts in thier stuff......Thanks in advance:)...................ML PS sorry if my event seems confusing I hope you get what I mean:)