Still having problems

#29
:-) ‎  ‎  I could ‎  have easily have made the outhouse frame a perfect 100 cm square, but then it would have looked way to big.... Outhouses are tiny buildings. ‎  The way it is now you can walk in to the building move 35 cm to the left or right, turn around and yeah even look down into to toilet..... So any bigger would have taken from the effect of the building....... Perhaps I should post all the parts so y'all can put in . you'll see with current specs it looks and performs as it should...

‎  I make ALOT of models and map pieces that extrude over the line... Remember my windmill huge map pieces. ‎  My cabin sets 3x3 pieces..... Some of map tiles are 9x9 . ‎  ‎  (for wide open spaces 9 tiles beats 81) . and lastly all, I repeat ALL of my mhm data is always over the 100cm line.. ‎  ‎  You don't never
Fall through holes in the floor on my maps do ya......nope...

Even johns water sets are 1x3 OVER the line... en. ‎  ‎  I don't toot my own horn much but I am one of the best modelers on this site hands down.... Man your gonna miss out on a lot of good work..... Oh well I digress, ‎  others will love it :-) ‎  .......... Oh yeah that scarecrow you liked years back.... Made it the same way :-) ‎  and all y'all look back at my cabin post ...... Shame I lost those pieces took 2 months and they were beautiful, had porches were multi level with basements... ‎  3x3 and made no slowdown, just sayin,'. ‎  ‎  ‎  ‎  ‎  ....ML
Reply



Messages In This Thread
Still having problems - by Havok - 2013-06-27, 09:17 AM
Re: Still having problems - by Madison Lastrega - 2013-06-27, 05:19 PM
Re: Still having problems - by Verdite - 2013-06-28, 01:01 AM
Re: Still having problems - by Havok - 2013-06-28, 06:00 AM
Re: Still having problems - by HwitVlf - 2013-06-28, 11:36 AM
Re: Still having problems - by Havok - 2013-06-28, 08:50 PM
Re: Still having problems - by HwitVlf - 2013-06-29, 12:09 AM
Re: Still having problems - by dmpdesign - 2013-06-29, 01:40 AM
Re: Still having problems - by Madison Lastrega - 2013-06-29, 05:02 AM
Re: Still having problems - by Havok - 2013-06-29, 05:15 AM
Re: Still having problems - by Madison Lastrega - 2013-06-29, 08:28 AM
Re: Still having problems - by Havok - 2013-06-29, 09:07 AM
Re: Still having problems - by Madison Lastrega - 2013-06-29, 05:11 PM
Re: Still having problems - by Verdite - 2013-06-29, 07:14 PM
Re: Still having problems - by HwitVlf - 2013-06-29, 07:39 PM
Re: Still having problems - by Madison Lastrega - 2013-06-30, 03:36 AM
Re: Still having problems - by HolyDiver - 2013-07-01, 04:45 PM
Re: Still having problems - by HolyDiver - 2013-07-01, 05:02 PM
Re: Still having problems - by Madison Lastrega - 2013-07-01, 06:51 PM
Re: Still having problems - by HwitVlf - 2013-07-01, 08:36 PM
Re: Still having problems - by HolyDiver - 2013-07-02, 09:24 AM
Re: Still having problems - by Madison Lastrega - 2013-07-02, 03:38 PM
Re: Still having problems - by HolyDiver - 2013-07-02, 04:52 PM
Re: Still having problems - by Madison Lastrega - 2013-07-03, 04:24 AM
Re: Still having problems - by Havok - 2013-07-03, 08:55 AM
Re: Still having problems - by HwitVlf - 2013-07-04, 07:19 PM
Re: Still having problems - by dmpdesign - 2013-07-04, 08:08 PM
Re: Still having problems - by HolyDiver - 2013-07-05, 09:34 AM
Re: Still having problems - by Madison Lastrega - 2013-07-05, 02:48 PM
Re: Still having problems - by HwitVlf - 2013-07-05, 08:05 PM



Users browsing this thread:
6 Guest(s)